How does the Fitness HR strap work?
Once paired to your device using the app, the HR strap (a) automatically detects, measures, and wirelessly transmits
your heart rate (bpm) in real time to your device (b).
When the 2 conductive pads (5) are properly moisturized and positioned on your chest, the HR sensor will detect your
ECG (electrical signal) and calculate your current heart rate frequency (beats per minute).
Technical specifications
Certified Bluetooth 4.0
Heart Rate range from 30 to 240 bpm
Transmission range up to 3m (~10 feet) - in open areas without interference
Adjustable fabric chest strap 66-133cm (26- 52.4 inch) with snap fit closure
Replaceable battery - CR2032
Battery life during normal use: > 1 year
Water resistance: IPX4 rated
Operating temperature: 0°C ~ 50°C
Storage temperature: 20°C ~ 60°C
Weight: total ~45g (~1.59oz) = ~ 15g (unit) + ~30g (Chest strap)
Support
You can also consult troubleshooting and FAQ guides on our website.
How to replace the battery?
1-
Use a coin to turn the battery cover ¼ turn counterclockwise to open the battery compartment at the back of the HR sensor.
2-
Remove and replace the old battery with a CR2032 type e-cell by inserting as indicated by the polarity markings (+/-).
3- Put the battery cover back in place by turning ¼ turn clockwise. Make sure the 0-ring is in the correct position.
We advise you to contact an authorized facility to change the battery. By changing the battery yourself, you risk
damaging the 0-ring and compromising the water resistance of the product thereby voiding the product warranty.
Precautions and safety instructions
1. Do not immerse the product in water.
2. Do not dismantle the product or attempt maintenance yourself.
3.
This product contains an e-cell battery, do not dispose of the product into household trash; instead, store it
separately and contact your local dealer for disposal.
4. Do not throw the product into fire.
5. This product is not intended for use by young children or infirm persons without supervision.
FCC regulation
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class C digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Please Note: Any change or modification, which has not been expressly authorized by iMaze, is liable to invalidate the
authorization granted to the user for the use of the equipment.
CE declaration of conformity
Product name: Bluetooth 4.0 heart rate strap
Is herewith confirmed to comply with the requirements set out in the Council (European parliament) Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility of Radio and Telecom
device (1999/5/EC). For the evaluation regarding this Directive, the following standards were applied:
EN300 440-1 v1.6.1:2010
EN300 440-2 v1.4.1:2010
EN301 489-1 v1.8.1:2008
EN301 489-3 v1.4.1:2002
EN62479:2010
EN60950-1/A12:2011
Warranty limitation
iMaze guarantees the initial purchaser that this product is free from defects of materials or manufacture for a period
of two years from the date of purchase. Please keep your receipt as proof of purchase.
- This warranty does not cover damage resulting from misuse, from a failure to respect the precautions for use, from
accidents, from improper maintenance, from commercial use or from use of non-approved software applications.
- This warranty does not cover loss (device and data) resulting from malfunction or misuse of the product.
- This warranty does not cover damage resulting from repairs carried out by persons not authorized by iMaze.
- The warranty does not cover batteries or cracked or broken casings where signs of a blow are evident.
- All photos and pictures representing our products on packaging are not contractual.
ref. pack: imaze03-PGSI001-EN
www.iMazecorp.com
© 2012 iMaze, Inc. All rights reserved. All trade and brand names are registered trademarks of their respective manufacturers.
L R
B
A
T
T
E
R
Y
C
R
2
0
3
2
3
v
o
p
e
n
FCC ID: 04GHRMBLE
IC: 7666A-HRMBLE
MODEL: HRMBLE
MADE IN CHINA
AN
L R
B
A
T
T
E
R
Y
C
R
2
0
3
2
3
v
o
p
e
n
FCC ID: 04GHRMBLE
IC: 7666A-HRMBLE
MODEL: HRMBLE
MADE IN CHINA
AN
o
p
e
n
B
A
T
T
E
R
Y
C
R
2
0
3
2
3
v
L R
FCC ID: 04GHRMBLE
IC: 7666A-HRMBLE
MODEL: HRMBLE
MADE IN CHINA
AN
L R
FCC ID: 04GHRMBLE
IC: 7666A-HRMBLE
MODEL: HRMBLE
MADE IN CHINA
AN
C
R
2
0
3
2
3
V
O
L
T
S
L
I
T
H
I
U
M
C
E
L
L
o
p
e
n
B
A
T
T
E
R
Y
C
R
2
0
3
2
3
v
L R
FCC ID: 04GHRMBLE
IC: 7666A-HRMBLE
MODEL: HRMBLE
MADE IN CHINA
AN
o
p
e
n
B
A
T
T
E
R
Y
C
R
2
0
3
2
3
v
L R
FCC ID: 04GHRMBLE
IC: 7666A-HRMBLE
MODEL: HRMBLE
MADE IN CHINA
AN
L R
B
A
T
T
E
R
Y
C
R
2
0
3
2
3
v
o
p
e
n
FCC ID: 04GHRMBLE
IC: 7666A-HRMBLE
MODEL: HRMBLE
MADE IN CHINA
AN
CC A
J
12
LP
1771
T
2
CC A
J
12
LP
1770
T
0
Thank you for purchasing this iMaze product. Combined with the smartPulse trainer app, the Bluetooth smart Heart
Rate strap turns your smartphone or tablet into a powerful GPS heart rate monitor.
WARNING
- Read all instructions thoroughly before use.
- This product is incompatible with Bluetooth 2.0 enabled devices (or lower) such as iPhone® 3/3S/4 and iPad® 1st and
2nd generations.
- iPhone, iPad, or other Bluetooth 4.0 enabled smart device is not included in the box.
- This product must be paired to your device using the smartPulse trainer app.
- The use of GPS positioning in multi-task mode over prolonged periods will cause increased battery consumption in
your device.
Before beginning or modifying any exercise program, please consult your physician. If you have a pacemaker or other
implanted electronic device, consult your physician before using a heart rate monitor. The HR strap is intended for
recreational use only and is not intended for medical purposes. Heart rate and other readings could be influenced by
interference from external sources.
If you use the HR strap with navigation software, always stay aware of your surroundings and do not fixate on the
screen. Moreover, set destinations and other user inputs prior to your departure to ensure your attention stays on task
instead of on the device.
Device compatibility
The Fitness HR strap is compatible with the latest generations of iPhone, iPad, iPod touch and others including:
- iPhone® 4S and 5
- iPad® 3rd generation and iPad® mini
- Other Bluetooth 4.0 enabled smart devices
Software compatibility
The Fitness HR strap must be paired to your device using the app
smartPulse trainer
to connect. Do NOT try to pair the
HR strap directly with your device in Bluetooth® Settings.
The HR strap may work with other apps but it may connect differently than the iMaze app does. Please see the other
app's website for detailed instructions on installation and use. You must pair and connect the HR strap separately with
each app you use. You can’t connect in one app and have it recognized in others.
Check on our website for the available smartPulse application compatible with your device.
What’s in the box?
• Bluetooth® 4.0 Heart Rate sensor
• Adjustable soft fabric chest strap
• Quick Start Guide
• Product Guide and Safe Use Instructions
Fitness HR strap overview
HR sensor
1. Snap buttons / F
2. Battery cover
Fabric strap
3. Snap buttons / M
4. Adjustable strap
5. Conductive pads
How to wear the HR strap?
- Snap the Heart Rate sensor into one end of the fabric strap (3).
- Adjust the fabric strap (4) length to fit your chest.
- Wrap it around your back, keeping the Heart Rate sensor facing up on your chest and the conductive pads in contact
(5) with your skin.
- Snap the other end of the strap into place (3).
• Before wearing, moisten both conductive pads of the strap with water.
• Make sure that the strap is comfortably but tightly attached around your chest.
Fitness HR strap
Bluetooth 4.0 Heart Rate strap
SFSTRHR-BLE/001-BL, SFTRHR-BLE/001-BE
EN
PRODUCT GUIDE AND SAFE USE INSTRUCTIONS
L R
B
A
T
T
E
R
Y
C
R
2
0
3
2
3
v
o
p
e
n
FCC ID: 04GHRMBLE
IC: 7666A-HRMBLE
MODEL: HRMBLE
MADE IN CHINA
AN
1
2
5
4
3
Joignez-vous à la conversation sur ce produit
Ici, vous pouvez partager ce que vous pensez du iMaze Fitness HR Strap Moniteur de fréquence cardiaque. Si vous avez une question, lisez d’abord attentivement le mode d’emploi. La demande d’un mode d’emploi peut être effectuée en utilisant notre formulaire de contact.