Mode d’emploi Lenco PDR-051PKWH Radio

Besoin d'un mode d’emploi pour votre Lenco PDR-051PKWH Radio ? Ci-dessous, vous pouvez consulter et télécharger gratuitement le mode d’emploi PDF en français. Ce produit a actuellement 2 questions fréquemment posées, 0 commentaires et 0 votes. Si ce n'est pas le mode d’emploi que vous souhaitez, veuillez nous contacter.

Votre produit est défectueux et le mode d’emploi n’offre aucune solution ? Rendez-vous à un Repair Café pour obtenir des services de réparation gratuits.

Mode d’emploi

Loading…

9 10
Using Your Radio
Power on/o using DAB Mode for the rst me:
When using The PDR-051 extend the antenna full for the best FM/DAB radio signal.
Shortpress STANDBY to turn on the radio to automacally enter the DAB mode. If this is the rst me the radio has entered
DAB mode, it will automacally search for and store DAB staons which are available in your local area.
The radio will automacally
synchronize me and date with the DAB signal found. Aer the search has nished rotate the
skip knob to select a staon and press ENTER to conrm. The selected staon will start to play.
FM radio
Press MODE to switch to Fm mode. In FM mode, press and hold the enter buon to start autoscan which searches and stores
the radio staons found. If the recepon signal should be adjusted, you can rotate
SKIP +/- to adjust the frequency manually.
You can store youre favorite radiostaon as preset by longpress the PRESET buon. Rotate SKIP to select the preset number
you want to store it and then press ENTER to save it to the selected locaon. To select a previously saved preset, short press
PRESET to show the preset list, then Rotate SKIP to select the radio staon frequency and press ENTER to con
rm your
selecon.
Standby:
Short press STANDBY to enter the STANDBY mode whilst using any playbackmode. When in Standby mode the display will
only show the me/date and (acve) alarms set.
In Standby mode, you can press INFO/MENU to set the me, date, alarm and other sengs.
To turn on the device again short press STANDBY again.
Long press STANDBY to turn the PDR-051 fully o. No me, date, ala
rm will be shown and the acve alarms won’t be
triggered.
NOTE: Only use the standby mode when the PDR-051 is connected to the mains poweradaptor.
Charging:
The PDR-051 can be charged while either powered on or o, It is recommended to use the supplied charger (output: 5VDC,
600mA) use the supplied micro USB cable for charging. The indicator LED light on the back is red when charging and the
ind
icator light is green when the baery is fully charged.
Menu Sengs
In the dierent playback modes, you can long press INFO/MENU to enter the menu sengs of the acve mode. Rotate SKIP
+/- to highlight a submenu item and press ENTER to enter the submenu. If there is only one menu in the sub-menu, press
ENTER to conrm the highlighted opon. To return to the previous menu press INFO/MENU.
Seng t
he date and me manually
If the PDR-051 can’t nd a signal to synchronise the me automac, you can set the me and date manually.
To do this press and hold INFO/MENU or press and hold ALARM&CLOCK, rotate SKIP to select Time/Date and press ENTER.
Rotate SKIP to adjust the date. Press ENTER to conrm and then repeat to set the Month, Year, Hour and minute
Aer you've set the date and me the menu
will automacally exit to the previous menu. The me/date you have set will be
saved automacally. Press "INFO/MENU" to return step by step or long press Info/Menu to exit the menu.
Auto Update/Set 12/24 Hour/Set Date Format opons
Set Time/Date: Set Hour system, Set Date Format, Auto update
Set Time/Date Set Time/Date. o1-01-2021 0.0=00
Auto Update: Select Update from Radio or No Update
Set Hou
r System: Select 12Hour or 24Hour
Set Date Format: Select dd-mm-yyyy, mm-dd-yyyy, yyyy-mm-dd
Alarm clock Sengs
To set the alarm clock short press clock ALARM to enter the alarm seng interface, Rotate SKIP to select alarm 1 or alarm 2,
3 or 4. Aer selecng the desired alarm short press the ENTER and rotate SKIP to select:
Time/Source/Repeat/Volume/ON/OFF seng opons.
Time: Select the me by r
otang SKIP and then press ENTER to conrm
Alarm me: 15/30/45/60/75/90/120 minutes
Source: FM, DAB, Buzzer, SD, USB
Repeat: There are Once/Daily/Weekends/Workday opons
Volume: Select the volume value through rotang SKIP le and right.
Alarm ON/OFF: On/O opon; Press ENTER to conrm
.
Aer seng, Press INFO/MENU to exit the alarm seng
.
When the
alarm sounds, the sound is gradually increasing to
the set volume. Short press ENTER buon to adjust the snooze countdown
me and acvate the snooze function; Short press STANDBY buon to turn o the alarm when it is ringing.
WARNING: We advise to not use the ALARM in baery mode to avoid that the baery could get empty at the wake up me!
Beer use the ALARM when the device is connected by USB cable to the external power supply.
DAB Funcon
I
f the PDR-051 enters DAB mode for the rst me the radio will automacally search for radio staons available in your local
area. If the radio has already searched for radio staons before, you can press and hold ENTER buon to automacally
search for staons again
Aer the staon search is completed, Rotate SKIP to move up and down the staons in the staon list, Press ENTER to select
the staon
Rotate VOLUME to adjust the appropriate volume.
Short press VOLUME to mute/unmute.
Short press the INFO/MENU to view the current radio informaon text in- formaon, signal strength program type, episode
name, channel number/frequency, signal error rate, bitrate, me and date etc.
Saving a DAB staon as Preset
Press and hold the PRESET buon to enter the radio staon preset-store interface. Rota
te SKIP to move the preset-store
posion up and down. Rotate "SKIP buon and ENTER to store the radio staon to the current posion
. Short press the
PRESET buon to enter the radio staon recall interface and then Rotate SKIP to select a preset-stored radio staon. press
the ENTER buon to conrm and play.
You also use the 0-9 number buons on the remote control to select the preset-stored radio s
taon for play.
Note: A total of 40 preset radio staons are available.
IMPORTANT INFORMATION REGARDING DAB+ RECEPTION
DAB+ radio recepon is dierent from FM radio recepon.
In FM, you can oen sll receive a weak staon, but probably with a rustling or crackling sound.
DAB + recepon works digitally and if there is not enough signal you hear nothing. No hiss or crackle as with FM. This
is
not due to the radio, but to the fact that there is not enough DAB+ signal at that locaon.
DAB + rule is: no or weak recepon = no sound.
Télécharger mode d’emploi en Français (PDF, 15.18 MB)
(Tenez compte de l’environnement et imprimez ce manuel uniquement si c’est vraiment nécessaire)

Loading…

Évaluation

Dites-nous ce que vous pensez du Lenco PDR-051PKWH Radio en laissant une note de produit. Vous voulez partager vos expériences avec ce produit ou poser une question ? Veuillez laisser un commentaire au bas de la page.
Etes-vous satisfait du Lenco PDR-051PKWH Radio ?
Oui Non
Soyez le premier à évaluer ce produit
0 évaluations

Joignez-vous à la conversation sur ce produit

Ici, vous pouvez partager ce que vous pensez du Lenco PDR-051PKWH Radio. Si vous avez une question, lisez d’abord attentivement le mode d’emploi. La demande d’un mode d’emploi peut être effectuée en utilisant notre formulaire de contact.

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Lenco PDR-051PKWH Radio. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Lenco. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Lenco PDR-051PKWH Radio dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Marque Lenco
Modèle PDR-051PKWH
Catégorie Radios
Type de fichier PDF
Taille du fichier 15.18 MB

Tous les modes d’emploi pour Lenco Radios
Plus de modes d’emploi de Radios

Foire aux questions sur Lenco PDR-051PKWH Radio

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Qu’est-ce que DAB+ ? Vérifié

DAB+ est le successeur du signal FM et signifie « Digital Audio Broadcasting. » (radiodiffusion sonore numérique). Il s’agit d'un signal numérique autorisant plusieurs chaînes dans la même bande passante et permettant un changement plus facile entre les chaînes.

Cela a été utile (302) En savoir plus

Quelle est la différence entre FM et AM ? Vérifié

FM et AM sont deux formes de modulation utilisées pour transmettre un signal. FM signifie « Frequency Modulation » (modulation de fréquence) et « AM » signifie « Amplitude Modulation » (modulation d’amplitude. AM est la plus ancienne forme de modulation. La plus grande différence réside dans le fait que le signal FM est bien plus fort que le signal AM.

Cela a été utile (243) En savoir plus
Mode d’emploi Lenco PDR-051PKWH Radio

Produits connexes

Catégories associées

×
Download