Mode d’emploi Makita DMR050 Radio

Mode d’emploi

4

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if it is

severely damaged or is completely worn out. The

battery cartridge can explode in a fire.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

10. The contained lithium-ion-batteries are subject to

the Dangerous Goods Legislation requirements.

For commercial transports e.g. by third parties,

forwarding agents, special requirement on packaging

and labeling must be observed.

For preparation of the item being shipped, consulting

an expert for hazardous material is required. Please

also observe possibly more detailed national

regulations.

Tape or mask off open contacts and pack up the

battery in such a manner that it cannot move around in

the packaging.

11. Follow your local regulations relating to disposal

of battery.

12. To avoid risk, the manual of replaceable the battery

should be read before use.

And the max discharging current of the battery should

be greater than or equal to 8A.

CAUTION:

• Danger of explosion if battery is incorrectly replaced.

• Replace only with the same or equivalent type.

SAVE THESE INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that

have been altered, may result in the battery bursting

causing fires, personal injury and damage. It will also void

the Makita warranty for the Makita tool and charger.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the battery

cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room

temperature at 10°C - 40°C (50°F - 104°F). Let a hot

battery cartridge cool down before charging it.

4. Charge the battery cartridge if you do not use it for

a long period (more than six months).

Installing or removing the slide battery

cartridge (Fig. 5)

WARNING:

Recharge only with the charger specified for the battery.

Use of any other batteries may create a risk of fire.

• Always switch off the tool before installing or removing

of the battery cartridge.

• To remove the battery cartridge, slide it from the tool

while pressing the button on the front of the cartridge.

• To install the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place.

Always insert it all the way until it locks in place with a

click. If you can see the red indicator on the upper side of

the button, it is not locked completely. Install it fully until

the red indicator cannot be seen. If not, it may accidentally

fall out of the tool, causing injury to you or to someone

around you.

Battery life indication

There is a battery icon [ ] on the LCD indicating the

battery life.

( ): battery life is more than 30%

( ): battery life is less than 30%

( ): battery life is less than 10%

( ): battery is almost dying out. You should charge the

battery immediately

Indicating the remaining battery capacity

(Only for battery cartridges with “B” at the end of the

model number.) (Fig. 6)

Press the check button on the battery cartridge to indicate

the remaining battery capacity. The indicator lamps light

up for few seconds.

015658

Indicator lamps

Remaining

capacity

Lighted Off Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

The battery may

have

malfunctioned.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Makita DMR050 Radio. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Makita. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Makita DMR050 Radio dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Makita Radios
Plus de modes d’emploi de Radios

Foire aux questions sur Makita DMR050 Radio

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Makita DMR103B Radio

Mode d’emploi

Makita BMR105 Radio

Mode d’emploi

Makita BMR104 Radio

Mode d’emploi

Makita DMR112 Radio

Mode d’emploi

Makita DMR104 Radio

Mode d’emploi

Makita DMR109 Radio

Mode d’emploi

Makita DMR107 Radio

Mode d’emploi

Makita BMR103B Radio

Catégories associées