Mode d’emploi Makita HR2010 Perforateur

Mode d’emploi

4

ENGLISH (Original instructions)

Explanation of general view

1 Switch trigger

2 Side grip

3 Bit shank

4 Bit grease

5Bit

6 Chuck cover

7 Depth gauge

8 Clamp screw

9 Grip base

10 Drill chuck

11 Chuck adapter

12 Commutator

13 Insulating tip

14 Carbon brush

15 Screwdriver

16 Brush holder cap

17 Lock nut wrench

18 Crank cap

19 Hammer grease

SPECIFICATIONS

Model HR2010

Capacities

Concrete............................................................. 20 mm

Steel ................................................................... 13 mm

Wood .................................................................. 24 mm

No load speed (min

–1

).......................................... 0 – 900

Blows per minute............................................... 0 – 4,000

Overall length ...................................................... 302 mm

Net weight ............................................................. 3.4 kg

Safety class............................................................. /II

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE041-1

Intended use

The tool is intended for hammer drilling in brick, concrete

and stone.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

GEB007-7

ROTARY HAMMER SAFETY WARNINGS

1. Wear ear protectors. Exposure to noise can cause

hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tools by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

4. Wear a hard hat (safety helmet), safety glasses

and/or face shield. Ordinary eye or sun glasses

are NOT safety glasses. It is also highly

recommended that you wear a dust mask and

thickly padded gloves.

5. Be sure the bit is secured in place before opera-

tion.

6. Under normal operation, the tool is designed to

produce vibration. The screws can come loose

easily, causing a breakdown or accident. Check

tightness of screws carefully before operation.

7. In cold weather or when the tool has not been

used for a long time, let the tool warm up for a

while by operating it under no load. This will

loosen up the lubrication. Without proper warm-

up, hammering operation is difficult.

8. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

9. Hold the tool firmly with both hands.

10. Keep hands away from moving parts.

11. Do not leave the tool running. Operate the tool

only when hand-held.

12. Do not point the tool at any one in the area when

operating. The bit could fly out and injure some-

one seriously.

13. Do not touch the bit or parts close to the bit

immediately after operation; they may be

extremely hot and could burn your skin.

14. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this instruc-

tion manual may cause serious personal injury.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Makita HR2010 Perforateur. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Makita. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Makita HR2010 Perforateur dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Makita Perforateurs
Plus de modes d’emploi de Perforateurs

Foire aux questions sur Makita HR2010 Perforateur

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Makita HR3210C Perforateur

Mode d’emploi

Makita BHR162RFJ Perforateur

Mode d’emploi

Makita HR2320T Perforateur

Mode d’emploi

Makita DHR264 Perforateur

Mode d’emploi

Makita BHR262 Perforateur

Mode d’emploi

Makita HR1841F Perforateur

Mode d’emploi

Makita HR5000 Perforateur

Mode d’emploi

Makita HR2811FT Perforateur

Catégories associées