Mode d’emploi Makita M4301 Scie sauteuse

Mode d’emploi

6 ENGLISH

General power tool safety warnings

WARNING: Read all safety warnings and

all instructions. Failure to follow the warnings and

instructionsmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Jig saw safety warnings

1. Hold power tool by insulated gripping sur-

faces, when performing an operation where

the cutting accessory may contact hidden wir-

ing or its own cord.Cuttingaccessorycontacting

a "live" wire may make exposed metal parts of the

power tool "live" and could give the operator an

electric shock.

2. Use clamps or another practical way to secure

and support the workpiece to a stable plat-

form.Holdingtheworkbyhandoragainstyour

bodyleavesitunstableandmayleadtolossof

control.

3. Always use safety glasses or goggles.

Ordinary eye or sun glasses are NOT safety

glasses.

4. Avoid cutting nails. Inspect workpiece for any

nails and remove them before operation.

5. Do not cut oversize workpiece.

6. Check for the proper clearance beyond the

workpiece before cutting so that the blade will

not strike the oor, workbench, etc.

7. Hold the tool rmly.

8. Make sure the blade is not contacting the

workpiece before the switch is turned on.

9. Keep hands away from moving parts.

10. Do not leave the tool running. Operate the tool

only when hand-held.

11. Always switch off and wait for the blade to

come to a complete stop before removing the

blade from the workpiece.

12. Do not touch the blade or the workpiece imme-

diately after operation; they may be extremely

hot and could burn your skin.

13. Do not operate the tool at no-load

unnecessarily.

14. Some material contains chemicals which may

be toxic. Take caution to prevent dust inhala-

tion and skin contact. Follow material supplier

safety data.

15. Always use the correct dust mask/respirator

for the material and application you are work-

ing with.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

FUNCTIONAL

DESCRIPTION

CAUTION: Always be sure that the tool is

switched off and unplugged before adjusting or

checking function on the tool.

Selecting the cutting action

►Fig.1: 1.Cuttingactionchanginglever

Thistoolcanbeoperatedwithanorbitalorastraight

line(upanddown)cuttingaction.Theorbitalcutting

actionthruststhejigsawbladeforwardonthecutting

stroke and greatly increases cutting speed.

Tochangethecuttingaction,justturnthecuttingaction

changing lever to the desired cutting action position.

Refertothetabletoselecttheappropriatecutting

action.

Position Cutting action Applications

0 Straight line cutting

action

For cutting mild

steel, stainless

steel and plastics.

For clean cuts in

wood and plywood.

I Smallorbitcutting

action

For cutting mild

steel, aluminum

and hard wood.

II Mediumorbit

cutting action

For cutting wood

and plywood.

For fast cutting in

aluminum and mild

steel.

III Largeorbitcutting

action

For fast cutting in

wood and plywood.

Switch action

CAUTION: Before plugging in the tool, always

check to see that the switch trigger actuates

properly and returns to the "OFF" position when

released.

►Fig.2: 1. Switch trigger 2.Lockbutton

To start the tool, simply pull the switch trigger. Tool

speedisincreasedbyincreasingpressureontheswitch

trigger. Release the switch trigger to stop.

For continuous operation, pull the switch trigger, push

inthelockbuttonandthenreleasetheswitchtrigger.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Makita M4301 Scie sauteuse. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Makita. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Makita M4301 Scie sauteuse dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Makita Scies sauteuses
Plus de modes d’emploi de Scies sauteuses

Foire aux questions sur Makita M4301 Scie sauteuse

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Makita 4350T Scie sauteuse

Mode d’emploi

Makita 4300BA Scie sauteuse

Mode d’emploi

Makita 4340FCT Scie sauteuse

Mode d’emploi

Makita 4341CT Scie sauteuse

Mode d’emploi

Makita BJV140RFE Scie sauteuse

Mode d’emploi

Makita 4350CT Scie sauteuse

Mode d’emploi

Makita DJV182ZJ Scie sauteuse

Mode d’emploi

Makita BJV140 Scie sauteuse

Catégories associées