Mode d’emploi Panasonic PV-L552 Caméscope

Mode d’emploi

5

Getting Started

Important Safeguards

15. Power Lines – An outside antenna system

should not be located in the vicinity of overhead

power lines or other electric light or power

circuits, or where it can fall into such power

lines or circuits. When installing an outside

antenna system, extreme care should be taken

to keep from touching such power lines or

circuits as contact with them might be fatal.

16. Overloading – Do not overload wall outlets

and extension cords as this can result in a

risk of fire or electric shock.

17. Objects and Liquids – Never push objects

of any kind into this video unit through

openings as they may touch dangerous

voltage points or short out parts that could

result in a fire or electric shock. Never spill

liquid of any kind onto the video unit.

18. Servicing – Do not attempt to service this

video unit yourself as opening or removing

covers may expose you to dangerous voltage

or other hazards. Refer all servicing to

qualified service personnel.

19. Damage Requiring Service – Unplug this

video unit from the wall outlet and refer

servicing to qualified service personnel under

the following conditions:

a. When the power-supply cord or plug is

damaged.

b. If any liquid has been spilled into, or

objects have fallen onto, the video unit.

c. If the video unit has been exposed to rain

or water.

d. If the video unit does not operate normally

by following the operating instructions.

Adjust only those controls that are covered

by the operating instructions, as an improper

adjustment of other controls may result in

damage and will often require extensive

work by a qualified technician to restore the

video unit to its normal operation.

e. If the video unit has been dropped or the

cabinet has been damaged.

f. When the video unit exhibits a distinct

change in performance – this indicates a

need for service.

20. Replacement Parts – When replacement

parts are required, be sure the service

technician has used replacement parts

specified by the manufacturer or have the

same characteristics as the original part.

Unauthorized substitutions may result in fire,

electric shock or other hazards.

21. Safety Check – Upon completion of any

service or repairs to this video unit, ask the

service technician to perform safety checks

to determine that the video unit is in safe

operating order.

Precautions

USE & LOCATION

• TO AVOID SHOCK HAZARD ... Your Camcorder and power supply should not be exposed to rain or moisture.

Do not connect the power supply or operate your Camcorder if it gets wet. Your Camcorder has been designed for

outdoor use, in all kinds of weather, however it will probably not survive any type of direct exposure to water, rain,

sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee. This action could permanently

damage the internal parts of your Camcorder. Do not attempt to disassemble this unit. There are no user

serviceable parts inside. Unplug your Camcorder from the power supply before cleaning.

• DO NOT AIM YOUR CAMCORDER AT THE SUN OR OTHER BRIGHT OBJECTS.

• DO NOT LEAVE THE CAMCORDER WITH THE EVF AIMED DIRECTLY AT THE SUN AS THIS MAY CAUSE

DAMAGE TO THE INTERNAL PARTS OF THE EVF.

• DO NOT EXPOSE YOUR CAMCORDER TO EXTENDED HIGH TEMPERATURE ... Such as, in direct sunlight,

inside a closed car, next to a heater, etc... This action could permanently damage the internal parts of your

Camcorder.

• AVOID SUDDEN CHANGES IN TEMPERATURE ... If the unit is suddenly moved from a cold place to a warm

place, moisture may form on the tape and inside the unit.

• DO NOT LEAVE YOUR CAMCORDER OR THE POWER SUPPLY TURNED ON WHEN NOT IN USE.

• STORAGE OF YOUR CAMCORDER ... Store and handle your Camcorder in a manner that will not subject it to

unnecessary movement (avoid shaking and striking). Your Camcorder contains a sensitive pick-up device which

could be damaged by improper handling or storage.

CARE

• TO CLEAN YOUR CAMCORDER ... Do not use strong or abrasive detergents when cleaning your Camcorder

body.

• TO PROTECT THE LENS ... Do not touch the surface of the lens with your hand. Use a commercial camcorder

lens solution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.

• TO PROTECT THE FINISH OF YOUR CAMCORDER ... Before handling your Camcorder, make sure your hands

and face are free from any chemical products, such as suntan lotion, as it may damage the finish.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Panasonic PV-L552 Caméscope. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Panasonic. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Panasonic PV-L552 Caméscope dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Panasonic Caméscopes
Plus de modes d’emploi de Caméscopes

Foire aux questions sur Panasonic PV-L552 Caméscope

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Panasonic NV-GS55 Caméscope

Mode d’emploi

Panasonic VDR-M50PP Caméscope

Mode d’emploi

Panasonic SDR-H20EG Caméscope

Mode d’emploi

Panasonic NV-MX8 Caméscope

Mode d’emploi

Panasonic PV-GS34 Caméscope

Mode d’emploi

Panasonic HX-DC3EP Caméscope

Mode d’emploi

Panasonic NV-GS180EG Caméscope

Mode d’emploi

Panasonic HX-DC10 Caméscope

Catégories associées