Mode d’emploi Pioneer DEH-X6600DAB Autoradio

Mode d’emploi

Black plate (5,1)

! This function is disabled while pausing. For

more details about pausing, refer to Pausing

on page 4.

! Depending on the band, text information can

be changed.

! Text information items that can be changed

depend on the area.

Listening to a recent broadcast

(time shift)

You can navigate through recent broadcasts

from the selected Service Component.

1 Press

/DIMMER to switch to time shift

mode.

Press again to resume the live broadcast.

2 Press c or d to adjust the playback point.

! Press c to skip back one minute.

! Press d to skip forward one minute.

This unit stores recent broadcasts to memory

automatically. The memory capacity of this unit

will vary depending on the bit rate of the Service

Component used. The approximate memory ca-

pacity is five minutes for 192 kbps.

Stored selections that are older than what can

be stored in the memory will not be available.

Selecting a Service Component

You can select a Service Component from the

following service list.

1 Press

(list) to switch to the service list

mode.

2 Turn M.C. to change the service list and

press to select.

Once selected, the following Service Component

functions can be adjusted.

SERVICE (service label)

You can select a Service Component from the list

of all components.

1 Turn M.C. to select a Service Component.

2 Press M.C. to receive a broadcast from the se-

lected Service Component.

Using alphabet search

1 Press

(list).

2 Turn M.C. to select a letter.

3 Press M.C. to display the alphabetical list.

4 Turn M.C. to select a Service Component.

5 Press M.C. to receive a broadcast from the se-

lected Service Component.

PROGRAM TYPE (PTY label)

You can select a Service Component from PTY in-

formation.

1 Turn M.C. to scroll to the desired PTY informa-

tion and press it to select.

NEWS/INFO—POPULAR—CLASSICS—

OTHERS

2 Turn M.C. to select a Service Component.

3 Press M.C. to receive a broadcast from the se-

lected Service Component.

ENSEMBLE (ensemble label)

You can select a Service Component from the rele-

vant ensemble.

1 Turn M.C. to scroll to the desired ensemble

and press it to select.

2 Turn M.C. to select a Service Component.

3 Press M.C. to receive a broadcast from the se-

lected Service Component.

Updating service list information

You can receive updates to the service list.

% Press and hold down

(list).

To cancel, press

(list) again.

Function settings

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select FUNCTION.

Once selected, the function below can be ad-

justed.

S.FOLLOW (alternative Service Component

search)

If the tuner cannot get good reception, the unit

will automatically search for another ensemble

that supports the same Service Component. If no

alternative Service Component can be found or re-

ception remains poor, this function will automati-

cally switch to an identical FM broadcast.

1 Press M.C. to turn alternative Service Compo-

nent search on or off.

Radio

Basic operations

Selecting a band

1 Press BAND/

until the desired band (FM1,

FM2,FM3 for FM or MW/LW) is displayed.

Switching preset stations

1 Press c or d.

! Select PCH (preset channel) under SEEK to

use this function.

Manual tuning (step by step)

1 Press c or d.

! Select MAN (manual tuning) under SEEK to

use this function.

Seeking

1 Press and hold c or d, and then release.

You can cancel seek tuning by briefly pressing

c or d.

While pressing and holding c or d, you can

skip stations. Seek tuning starts as soon as

you release c or d.

Notes

! For details about SEEK, refer to SEEK (left/

right key setting) on page 6.

! This unit’s AF (alternative frequencies

search) function can be turned on and off.

AF should be off for normal tuning operation

(refer to AF (alternative frequencies search)

on page 6).

Storing and recalling stations

for each band

Using preset tuning buttons

1 To store: Press and hold down one of the

preset tuning buttons (1/

to 6/ ) until

the number stops flashing.

2 To recall: Press one of the preset tuning

buttons (1/

to 6/ ).

Switching the display

Selecting the desired text information

1 Press DISP to cycle between the following:

! FREQUENCY (program service name or

frequency)

! BRDCST INFO (program service name/PTY

information)

! CLOCK (source name and clock)

English

Using this unit

5

Section

Using this unit

En

02

<QRD3198-B>5

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Pioneer DEH-X6600DAB Autoradio. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Pioneer. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Pioneer DEH-X6600DAB Autoradio dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Pioneer Autoradios
Plus de modes d’emploi de Autoradios

Foire aux questions sur Pioneer DEH-X6600DAB Autoradio

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Pioneer DEH-X3600UI Autoradio

Mode d’emploi

Pioneer DEH-1300R Autoradio

Mode d’emploi

Pioneer DEH-S420BT Autoradio

Mode d’emploi

Pioneer DEH-2320UB Autoradio

Mode d’emploi

Pioneer MVH-190UBG Autoradio

Mode d’emploi

Pioneer DEH-P3630MP Autoradio

Mode d’emploi

Pioneer AVH-X8800BT Autoradio

Mode d’emploi

Pioneer DEH-X5600BT Autoradio

Catégories associées