Mode d’emploi Tefal FV7010K0 Fer à repasser

Mode d’emploi

5

• During the first few uses, a harmless odour and smoke may be given off. This has

no effect on the use of the iron and will disappear quickly.

What water to use ?

• Your appliance has been designed to operate using untreated tap water. However,

it is necessary to operate the Self-Clean function regularly in order to eliminate hard

water deposits from the steam chamber.

• Heat concentrates the elements contained in water during evaporation.The types of

water listed below contain organic waste or mineral elements that can cause

spitting, brown staining, or premature wear of the appliance: water from clothes

dryers, scented or softened water, water from refrigerators, batteries or air

conditioners, boiled filtered or bottled mineral water, pure distilled or demineralised

water or rain water should not be used in your Tefal iron.

Filling the water tank

• Put the switch into the Cordless position – fig.5 and remove the iron from

its base.

• Set the steam control to DRY – fig.6.

• Place the iron flat and fill it –

fig.7.

• Put the iron back on its base.

Use

Adjust the temperature and the steam

• Select the temperature (see table below or iron’s heel) setting the thermostat facing

the indicator –

fig.8.

• The thermostat light comes on –

fig.9. It will go out when the soleplate is hot

enough.

• Set the steam control –

fig.10 to the desired position, consulting the table below.

RECOMMENDATIONS

• Your iron heats up quickly: so begin by ironing fabrics that are ironed at low

temperatures first, then go on to those requiring a higher temperature.

• If you turn down the thermostat, wait until the thermostat light comes back on

before beginning to iron again.

• When ironing fabrics with mixed fibres, set the ironing temperature for the most

delicate fibre.

• For delicate fabrics we recommend testing the fabric first on an inconspicious place

eg (inside the hem).

Go back into Cordless mode

Use this ironing mode for small garments and fabrics that are easy to iron.

• Put the switch into the Cordless position –

fig.5. You can start to iron as soon

as the thermostat indicator light goes off.

Go back into Corded mode

Use this ironing mode for thick fabrics that are difficult to iron or in cases where you find yourself often using the

b

oost of steam button

– fig.4.

• Put the switch into the Corded position. –

fig.1. You can start to iron as soon

as the thermostat indicator light goes off.

Obtain more steam

• Press the boost of steam button from time to time – fig.4.

• Wait a few seconds between each shot before pressing the boost of steam button

again.

Attention: Always

remove your iron from

the base before filling it

up.Fill the tank up to

the“MAX”.

Never fill the appliance

by holding it directly

under the tap.

= STEAM ZONE

In order to avoid water

dripping from the iron

onto the linen:

- Turn off the steam

when ironing silk or

synthetic fabrics.

- Set it at the minimum

position for wool.

If your water is very

hard, it is possible to mix

tap water with store-

bought distilled or

demineralised water in

the following

proportions:

- 50% tap water,

- 50% distilled or

demineralised water.

GB

For optimum

efficiency, always put

your iron back on its

base.

FABRIC

POSITION OF

THERMOSTAT CURSOR

STEAM SETTING

POSITION

LINEN MAX

COTTON

•••

WOOL

••

SILK

•

SYNTHETIC

(Polyester,Acetate, Acrylic, Nylon)

If you have to use the

boost of steam button

frequently, use the

iron in the Corded

position.

1800113565_FV7XXX 7/04/08 17:11 Page 5

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Tefal FV7010K0 Fer à repasser. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Tefal. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Tefal FV7010K0 Fer à repasser dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Tefal Fers à repasser
Plus de modes d’emploi de Fers à repasser

Foire aux questions sur Tefal FV7010K0 Fer à repasser

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Tefal SV9203G0 Express Protect Fer à repasser

Mode d’emploi

Tefal GV9721E0 Fer à repasser

Mode d’emploi

Tefal FV2845T0 Fer à repasser

Mode d’emploi

Tefal SV6112E1 Fer à repasser

Mode d’emploi

Tefal SV6111E1 Fer à repasser

Mode d’emploi

Tefal FV8064G0 Fer à repasser

Mode d’emploi

Tefal FV2882G0 Fer à repasser

Mode d’emploi

Tefal GV9711E0 Fer à repasser

Catégories associées