Mode d’emploi VonHaus 3500170 Scie sauteuse

Mode d’emploi

A5P | 01

Prevent unintentional starting. Ensure the switch is in the

o-position before connecting to power source and/or

battery pack, picking up or carrying the tool.

Carrying power tool/machine with your nger on the

switch or energizing power tool/machine that have the

switch on invites accidents.

Remove any adjusting key or spanner before turning the

power tool/machine on. A spanner or a key left attached

to a rotating part of the power tool/machine may result in

personal injury.

Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool/

machine in unexpected situations.

Dress appropriately. Do not wear loose clothing or jew-

ellery.

Keep your hair, clothing and gloves away from moving

parts. Loose clothes, jewellery or long hair can be caught

in moving parts.

If devices are provided for the connection of dust extrac-

tion and collection facilities, ensure these are connected

and properly used. Use of dust collection can reduce

dust-related hazards.

WORK AREA SAFETY Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

Do not operate power tool/machine in explosive atmos-

pheres, such as in the presence of ammable liquids,

gases or dust.

Power tool/machine create sparks which may ignite the

dust or fumes.

Keep children and bystanders away while operating a

power tool/machine. Distractions can cause you to lose

control.

GENERAL POWER TOOL USE AND CARE Do not force

the power tool/machine. Use the correct power tool/ma-

chine for your application. The correct power tool/ma-

chine will do the job better and safer at the rate for which

it was designed.

Do not use the power tool/machine if the switch does not

turn it on and o. Any power tool/machine that cannot

be controlled with the switch is dangerous and must be

repaired.

Disconnect the plug from the power source and/or the

battery pack from the power tool/machine before making

any adjustments, changing accessories, or storing pow-

er tool/machine tools. Such preventive safety measures

reduce the risk of starting the power tool/machine ac-

cidentally.

Store idle power tool/machine out of the reach of children

and do not allow persons unfamiliar with the power tool/

machine or these instructions to operate the power tool/

machine.

Power tool/machines are dangerous in the hands of un-

trained users.

Maintain power tool/machines. Check for misalignment

or binding of moving parts, breakage of parts and any

other condition that may aect the power tool/machines

operation. If damaged, have the power tool/machines

repaired before use. Many accidents are caused by

poorly maintained power tool/machines.

Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

Use the power tool/machine accessories and tool bits in

accordance with these instructions, take into account the

working conditions and the work to be performed.

Use of the power tool/machine for operations dierent

from those intended could result in a hazardous situation.

CLEANING & MAINTENANCE Never soak or immerse

electrical components and or a component that has a

plug attached.

Disconnect the plug from the power source before mak-

ing any adjustments, changing accessories, or storing.

Such preventive safety measures reduce the risk of start-

ing the power tool accidentally.

Ensure the motor has fully stopped before cleaning,

clearing a blockage, checking, or carrying out any main-

tenance on the tool.

Maintain your power tool. Check for misalignment or

binding of moving parts, breakage of parts and any oth-

er condition that may aect the power tool’s operation.

If damaged, have the power tool repaired by a qualied

repair person before use. Many accidents are caused by

poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

Regularly check external nuts and xings to ensure vibra-

tion caused by normal use has not begun to loosen them.

Store idle power tools out of reach of children and do

not allow persons unfamiliar with the power tool or these

instructions to operate the Breaker.

Locate the power tool out of reach of children, in a dry,

locked unit.

Make sure that the cord is located so that it will not be

stepped on, tripped over, or otherwise subjected to dam-

age or stress.

Remove the plug from the mains socket / battery (where

applicable) before carrying out any adjustment or main-

tenance.

Always store the power tool/machine in a dry place.

If the power cord is damaged, it must be replaced by a

qualied service technician.

Keep the ventilation slots and motor housing as free of

dirt and dust as possible (where applicable).

Clean the power tool/machine by rubbing it with a clean

cloth and blow it clean using low-pressure compressed

air is recommended.

Ensure you have all the pieces listed. If you are missing

any components, contact our customer services depart-

ment at

[email protected] (UK/EU)

[email protected] (US). DO NOT proceed

with assembly if any components are missing.

ADDITIONAL SAFETY INSTRUCTIONS FOR JIGSAW

Do not start the tool with the blade touching any

surface.

Allow the tool to come to a complete stop before laying

to rest.

A running tool will jerk when the tip of the blade con-

tacts any surface.

Do not cut oversized work pieces.

Do not cut nails or screws unless you are using a blade

specically designed for this purpose.

Inspect the material before cutting.

Before switching on the tool, be sure the blade is secure

and is not in contact with the work piece.

Keep hands away from moving parts.

Do not place hands on the surface of the work piece

while the saw is in operation.

Do not place hands below the work surface while the

saw is in operation.

Hold the tool by the insulated grip surface when in use.

where the cutting tool may contact the hidden wiring or

its own cord. Contact the alive wire make exposed the

metal parts of the tool alive and shock the operator.

Do not look directly at the blade whilst the tool is is use.

The blade can cause kickback to the tool and this may

cause serious injury.

Check the area for proper clearance before cutting. This

will avoid cutting into the workbench, the oor, etc.

TECHNICAL SPECIFICATION

Rated Voltage 18V

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos VonHaus 3500170 Scie sauteuse. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter VonHaus. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre VonHaus 3500170 Scie sauteuse dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour VonHaus Scies sauteuses
Plus de modes d’emploi de Scies sauteuses

Foire aux questions sur VonHaus 3500170 Scie sauteuse

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

AYCE NC600JS Scie sauteuse

Mode d’emploi

Ryobi RJS18-0 Scie sauteuse

Mode d’emploi

Pattfield PE-20 JSB Scie sauteuse

Mode d’emploi

Trotec PJSS 12-230V Scie sauteuse

Mode d’emploi

Stayer JS 55 CE Scie sauteuse

Mode d’emploi

Parkside IAN 338176 Scie sauteuse

Mode d’emploi

Parkside PSTK 800 C3 Scie sauteuse

Mode d’emploi

Stayer S 90 PE K Scie sauteuse

Catégories associées