Mode d’emploi Vonroc HT504AC Taille-haies

Mode d’emploi

EN

5WWW.VONROC.COM

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditi-

ons will reduce personal injuries.

c)

Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with

your finger on the switch or energising power

tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

e) Do not overreach. Keep proper footing and ba-

lance at all times. This enables better control of

the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewel-

lery or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust related hazards.

h)

Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. A careless action

can cause severe injury within a fraction of a

second.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and

must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool be-

fore making any adjustments, changing acces-

sories, or storing power tools. Such preventive

safety measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach of child-

ren and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the

hands of untrained users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges

are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions, ta-

king into account the working conditions and the

work to be performed. Use of the power tool for

operations different from those intended could

result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles

and grasping surfaces do not allow for safe

handling and control of the tool in unexpected

situations.

5) Service

a) Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

ADDITIONAL SAFETY WARNINGS FOR

HEDGE TRIMMER

• Keep the area you are working in clean and tidy.

• Always hold the trimmer properly. When opera-

ting us both hands.

• If you are using a means of support to raise

yourself off the ground, ensure that it is stable

and cannot topple over - do not overreach at

any time.

• Do not use power tools in the rain or wet en-

vironments. Do not use power tools where there

is a risk of fire or explosion - i.e. near flammable

liquids or gases.

• Do not allow children into the area where you

are working.

• Do not let children or other people touch power

tools.

• Do not leave the power tool unattended.

•

Store in a dry place well out of reach of children.

• Always use safety glasses and gloves. We also

recommend the use of ear protectors.

• Wear the right clothes - not loose fitting or je-

wellery and ensure garments cannot come into

contact with moving parts.

• If you have long hair, tie it back safely to avoid

tangling it in moving parts.

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Vonroc HT504AC Taille-haies. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Vonroc. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Vonroc HT504AC Taille-haies dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Vonroc Taille-haies
Plus de modes d’emploi de Taille-haies

Foire aux questions sur Vonroc HT504AC Taille-haies

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Vonroc S_HT501DC Taille-haies

Mode d’emploi

Vonroc HT503DC Taille-haies

Mode d’emploi

Vonroc S_HT503DC Taille-haies

Mode d’emploi

Vonroc S2_HT503DC Taille-haies

Mode d’emploi

Vonroc S3_HT503DC Taille-haies

Mode d’emploi

Vonroc HT501DC Taille-haies

Mode d’emploi

Parkside IAN 420421 Taille-haies

Mode d’emploi

Primaster PMESH 1000 Taille-haies

Catégories associées