Mode d’emploi Vonroc S4_JS501DC Scie sauteuse

Mode d’emploi

EN

5

WWW.VONROC.COM

c) Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking up

or carrying the tool. Carrying power tools with

your finger on the switch or energising power

tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewelle-

ry or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct po-

wer tool for your application. The correct power

tool will do the job better and safer at the rate

for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and

must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool be-

fore making any adjustments, changing acces-

sories, or storing power tools. Such preventive

safety measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach of child-

ren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in

the hands of untrained users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f)

Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed. Use of the power tool

for operations different from those intended

could result in a hazardous situation.

5) Battery tool use and care

a)

Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one

type of battery pack may create a risk of fire when

used with another battery pack.

b) Use power tools only with specifically desig-

nated battery packs. Use of any other battery

packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects that can make a connection from one

terminal to another. Shorting the battery termi-

nals together may cause burns or a fire.

d)

Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acci-

dentally occurs, flush with water. If liquid contacts

eyes, additionally seek medical help. Liquid ejec-

ted from the battery may cause irritation or burns.

6) Service

a) Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

SAFETY WARNINGS FOR JIG SAWS

•

Warning of laser radiation. Laser class 2, P

max.: <1 mW, λ: 650 nm, EN 60825-1:2014.

Do not look directly into the laser beam or the

opening from which it emerges. Never point

the laser beam at people, animals or reflective

surfaces. Even brief eye contact can lead to eye

damage. Examining the laser output aperture

by use of optical instruments (e.g. magnifying

glass, magnifiers and the like) entails the risk of

eye damage. When working with a laser of class

2, observe the national regulations on wearing

eye protection.

•

Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring. Cutting

accessory contacting a “live” wire may make

exposed metal parts of the power tool “live” and

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Vonroc S4_JS501DC Scie sauteuse. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Vonroc. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Vonroc S4_JS501DC Scie sauteuse dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Vonroc Scies sauteuses
Plus de modes d’emploi de Scies sauteuses

Foire aux questions sur Vonroc S4_JS501DC Scie sauteuse

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Vonroc JS504DC Scie sauteuse

Mode d’emploi

Vonroc JS503AC Scie sauteuse

Mode d’emploi

Vonroc JS501DC Scie sauteuse

Mode d’emploi

Vonroc S2_JS501DC Scie sauteuse

Mode d’emploi

Vonroc S_JS502AC Scie sauteuse

Mode d’emploi

Vonroc S_JS501DC Scie sauteuse

Mode d’emploi

Vonroc JS502AC Scie sauteuse

Mode d’emploi

Vonroc S_JS504DC Scie sauteuse

Catégories associées