Mode d’emploi Waring Commercial MX1300XTX Blender

Mode d’emploi

2 3

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be

followed, including the following:

1. READ ALL INSTRUCTIONS.

2. To protect against risk of electrical shock, do not put appliance in

water or other liquid.

3. Always unplug from outlet prior to handling or cleaning.

4. This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they do not play with

the appliance.

5. Unplug from outlet when not in use, before putting on or taking off

parts and before cleaning.

6. Avoid contact with moving parts.

7. Do not operate the Waring

®

Blender or any other electrical

equipment with a damaged cord or plug, or after the unit

malfunctions, or is dropped or damaged in any manner. Return

it to the nearest authorized service facility for examination, repair,

or adjustment.

8. The use of attachments, including canning jars, not recommended

or sold by Waring may cause re, electric shock, or injury.

9. Do not use outdoors.

10. Do not let cord hang over edge of table or counter, or touch hot

surfaces.

11. Keep hands and utensils out of jar while blending, to prevent the

possibility of severe personal injury and/or damage to the blender.

A rubber spatula may be used, but must be used only when the

blender is not running.

12. CAUTION: Blade is sharp. Handle carefully.

13. Always operate blender with lid in place.

14. When blending hot liquids, remove center piece of two-piece cover.

See hot blending instructions, page 8.

15. The use of ear protection is recommended during extended

operating periods.

16. Do not leave blender unattended while it is running.

17. See cleaning and sanitizing instructions, pages 9-11.

NOT FOR WATERJET CLEANING.

SAVE THESE INSTRUCTIONS

1. Power On/Off Button - Pressing this button will turn the blender on and

off. When the unit is turned on, the blue LCD backlight will illuminate and will

prompt user when the machine is ready for blending.

2. Start/Stop Button - Pressing this button once while in standby mode will

cause the blender to run. Pressing this button again will stop the blender

from running. NOTE: The blender should not be run without a container or

with an empty container.

3. Speed Controls - Gradually increase or decrease the blending speed

of the blender in 1% increments. The speeds range from 15% to 100%.

The speed controls can also set the speed of the Norm Pulse function.

NOTE: Speed settings will be saved when unit is turned off.

4. Maximum Pulse Control - Pressing this button provides a quick burst of

speed during a blending cycle. The MAX Pulse button will run the blender at

150% power (30,000 RPMs).

5. Normal Pulse Control - Pressing this button provides a quick burst of

speed during blending cycles at speeds of less than 100%. The Norm Pulse

button will run the blender at 100% power (20,000 RPMs).

6. LCD Display - This window will display all operating messages with a

sharp blue LCD backlight.

7. Program Buttons for Pre-set Beverage Stations - The blender comes

with 4 preprogrammed beverage stations. These stations consist of the

most frequently blended kinds of drinks. All stations are reprogrammable to

accommodate the user’s preferences. See page 6 for details on this feature.

CONTROL PANEL

1

6

4

5

2

3

7

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Waring Commercial MX1300XTX Blender. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Waring Commercial. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Waring Commercial MX1300XTX Blender dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Waring Commercial Blenders
Plus de modes d’emploi de Blenders

Foire aux questions sur Waring Commercial MX1300XTX Blender

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Waring Commercial MX1500XTS Blender

Mode d’emploi

Waring Commercial MMB160E/K Blender

Mode d’emploi

Waring Commercial TBB160 Blender

Mode d’emploi

Waring Commercial TBB145 Blender

Mode d’emploi

Waring Commercial MX1200XTS Blender

Mode d’emploi

Waring Commercial BB340 Blender

Mode d’emploi

Waring Commercial MX1100XTX Blender

Mode d’emploi

Waring Commercial MX1100XTS Blender

Catégories associées