Mode d’emploi Waring Commercial MX1300XTX Blender

Mode d’emploi

4 5

GROUNDING INSTRUCTIONS

• Foryourprotection,Waring

®

blenders are equipped with a 3-conductor

cordset having a molded 3-prong grounding-type plug, and should be

used in combination with a properly connected grounding-type outlet as

showninFigureA.Ifagrounding-typeoutletisnotavailable,anadapter,

asshowninFigureB,maybeusedtoenablea2-slotwalloutlettobe

used with a 3-prong plug.*

 AsshowninFigureC,theadaptermustbegroundedbyattachingits

grounding lug under the screw of the outlet cover plate.

 CAUTION:Beforeusinganadapter,itmustbedeterminedthatthe

outletcoverplatescrewisproperlygrounded.Ifindoubt,consulta

licensed electrician.

Never use an adapter unless you are sure it is properly grounded.

*NOTE: Use of an adapter is not permitted in Canada.

NOTE: User-installed cord set plugs are not permitted in Europe.

MX1300XTX/MX1300XTP/MX1300XTS & MX1500XTX/MX1500XTP/MX1500XTS

BLENDER SPECIFICATIONS

•Capacity:64oz.WorkingCapacity(48oz.capacitywithMX1300XTP&

MX1500XTP versions)

•SwitchSettings:Reprogrammable

•VariableMotorSpeed:Minimum3,000RPMs/Maximum20,000RPMs

(30,000 RPM with Pulse)

•Rating:120Volts-13.0Amps

•BaseMaterial:Polycarbonate

•PolycarbonateSoundEnclosureincludedwithMX1500XTX/MX1500XTP/

MX1500XTS versions only

•Bearing:HighPrecisionBallBearing

•Cord:6-FootThree-ConductorGroundCorewithStrainReliefinBase

•OverallHeight:21Inches

• OperatingCycle:1minuteON/3minutesOFF

•Weight:18lbs

•cETLu s ,NSFlisted

OPERATION

 1. PlugthepowercordintoACoutlet.PresstheOn/Off

button to

turn the unit on. The blue LCD backlight will turn on and the words

WARINGCOMMERCIALwillappear,indicatingthatthepowerison.

After 5 seconds, the blender enters standby mode.

NOTE:Instandbymode,theblenderisawaitingdirectionsandwillread

PRESSANYBUTTONTOBLEND.

2. The motor speed can be adjusted by pressing the or Speed

buttons. Speed ranges from 15% to 100%.

100% 20,000 RPMs

50% 10,000 RPMs

15% 3,000 RPMs

The Speed Up button will increase the motor speed display in 1%

increments and the Speed Down button will decrease the motor

speeddisplayin1%increments.Holdingdowneitherbuttonwillquickly

scroll through speeds.

Using the Speed Up and Speed Down buttons, set desired motor

speed.Ifnospeedisselected,motorwilldefaultto100%.

NOTE:ThemotordoesnotrunatthenewlysetspeeduntiltheStart/

Stop

buttonispressed.IfStart/Stop

button is not pressed

within5seconds,thenewspeedsettingwillbestoredfornextuseand

the blender will return to standby mode; the display will once again read

PRESSANYBUTTONTOBLEND.

 3. PressStart/Stop

buttontoturntheblenderon.Blenderwillrun

continuously at the set speed. The LCD will display the motor speed in

percentage. Default speed (percentage) is at 100%. Motor speed can be

changed while blender is running by simply pressing Speed Up

or

Speed Down button.

 4. Tostopcontinuousblendingoperation,pressStart/Stop

button or

press any of the program buttons.

PULSE FEATURES

Your unit comes equipped with two Pulse options: Normal Pulse

and

MaximumPulse

. Note: The Pulse buttons are momentary switches –

once released, the unit will shut off.

 1. TouseMaxpulseoption,pressthe button. This will run the motor

at 150% speed. The LCD will read MAX PULSE SPEED: 150%.

2. To use Normal pulse option, press the

button. This will run the motor

at100%speed.TheLCDwillreadNORMPULSESPEED:100%.

3. The blender allows you to set the pulse to your desired speed. While

blending at Normal pulse speed, the motor can be adjusted. To do this,

hold the

Pulse button and press Speed Up or Speed Down

Évaluation

En savoir plus sur ce mode d’emploi

Nous comprenons qu’il est agréable d’avoir un mode d’emploi papier pour vos Waring Commercial MX1300XTX Blender. Vous pouvez toujours télécharger le mode d’emploi depuis notre site Web et l’imprimer vous-même. Si vous souhaitez disposer d’un mode d’emploi original, nous vous recommandons de contacter Waring Commercial. Ils pourront peut-être fournir un mode d’emploi original. Recherchez-vous le mode d’emploi de votre Waring Commercial MX1300XTX Blender dans une autre langue ? Choisissez votre langue préférée sur notre page d’accueil et recherchez le numéro de modèle pour voir si nous l’avons disponible.

Caractéristiques

Tous les modes d’emploi pour Waring Commercial Blenders
Plus de modes d’emploi de Blenders

Foire aux questions sur Waring Commercial MX1300XTX Blender

Notre équipe d’assistance recherche des informations utiles sur les produits et des réponses aux questions fréquemment posées. Si vous trouvez une inexactitude dans notre foire aux questions, veuillez nous le faire savoir en utilisant notre formulaire de contact.

Produits connexes

Mode d’emploi

Waring Commercial MX1500XTS Blender

Mode d’emploi

Waring Commercial MMB160E/K Blender

Mode d’emploi

Waring Commercial TBB160 Blender

Mode d’emploi

Waring Commercial TBB145 Blender

Mode d’emploi

Waring Commercial MX1200XTS Blender

Mode d’emploi

Waring Commercial BB340 Blender

Mode d’emploi

Waring Commercial MX1100XTX Blender

Mode d’emploi

Waring Commercial MX1100XTS Blender

Catégories associées